By BiSM1LLah-empiritrage. Area Rugs and Pads. At Friday, November 09th 2018, 04:54:27 AM.
If you're using an area rug in a room, don't cover your floor completely. Your original floors will make a nice border to your rug. Even when you want to use a large rug, subtract at least 9-12 inches from your baseboards so that some of your flooring will show through. Finally, always use a non-ski rug pad underneath area rugs to prevent movement of the rug. The rug pad should be about 2 inches smaller than the rug so that it doesn't show through.
When a rug is walked on, there is pressure to push through the rug and hit the floor. A quality rug pad will act as a barrier between the carpet and the floor to prevent any scratching from the back of the rug to the floor. Therefore, the carpet pad should be solid as opposed to one with holes in it. The more solid and dense the pad, the better the protection to the hardwood floor.
For finding pads that do not harm floors, in our experience with the pad industry, the domestically made rubber backed products to include the open mesh and felt products seem to perform best for not harming floors. The felt products without rubber backing are also functional for not harming floors.. The pads that seem to cause the most problems are the PVC products from China. For the most part, we feel, these products will not harm floors. But there have been circumstances we have heard about where they have been blamed for causing harm. In speaking with industry experts about coating PVC, we know that coating PVC is a very delicate process and must be controlled to the exact specifications each time. The curing oven must be set to the proper curing temperatures. The coating speed must be exact every time. The PVC coating compound must be made to the exact same specification each time. Any variance in controlling the coating specifications could cause the PVC coated pad to be too tacky or too dry. Being too tacky is the biggest issue with harming floors as it could stick to the flooring and then there is an issue with how to remove it without harming the floors.