By BiSM1LLah-empiritrage. Area Rugs and Pads. At Sunday, November 04th 2018, 06:27:44 AM.
Although the rug is what you see on the surface, there is much more that goes into the actual installation process. As you can imagine, a rug is not simply laid on top of the concrete or wood that is already in place. While this could be done, it is not something that you want to do if you want the job completed the right way. When it comes down to it, the rug pad that is used is just as important as what you see on the surface. If the correct rug pad is used, you will recognize this in a number of different ways. Of course, if the rug pad is left out, or a low quality option is used, you are going to notice this as well; just not in the same way.
Once you know what kind of pad you need, you will need to know what size. The pad should be slightly less than the length and width of the area rug. You can usually buy already cut to size pads for most standard sized rugs. In some cases, however, you may find that your rug is a unique size. In that case you would want to buy a pad that is larger than your rug and custom cut it to size.
The next pad is one that has a non slip feature for rugs that tend to move around, mostly rugs size 6'x9' and under. This pad is a dense needle punched recycled jute surface with a natural layer of solid rubber backing. This is the pad that is textured on the surface to grab your rug and the rubber holds everything to the floor. It is 1/4 of an inch thick and extremely dense. Use this safely on all floors as long as you get one with a solid rubber and not a sprayed on latex that can harm floors.