By BiSM1LLah-empiritrage. Area Rugs and Pads. At Friday, December 14th 2018, 09:44:24 AM.
Protecting your rug from mildew: Rug pads allow air to circulate around the rug. It sort of makes the rug more 'breathable.' This helps to prevent your rug from getting mildewed or getting moldy. Not only are these problems unhealthy, but they will stain your-rug and ruin it quickly. This is especially important in areas of the country that have a lot of humid weather.
For rugs that do not tend to slip, a 100% felt jute pad is excellent. This is dense enough to protect the floor from scratches and indentations. Make sure that the felt rug pad is a 40 ounce, referring to the amount of fiber there is per square yard of pad. The higher the ounce, the more dense the carpet pad. If the rug tends to slip, then a felt and natural rubber rug pad is ideal. Here, the key is to make sure it is natural rubber as opposed to the chemical sprays that look and feel like rubber but actually could severely harm the floor.
For finding pads that do not harm floors, in our experience with the pad industry, the domestically made rubber backed products to include the open mesh and felt products seem to perform best for not harming floors. The felt products without rubber backing are also functional for not harming floors.. The pads that seem to cause the most problems are the PVC products from China. For the most part, we feel, these products will not harm floors. But there have been circumstances we have heard about where they have been blamed for causing harm. In speaking with industry experts about coating PVC, we know that coating PVC is a very delicate process and must be controlled to the exact specifications each time. The curing oven must be set to the proper curing temperatures. The coating speed must be exact every time. The PVC coating compound must be made to the exact same specification each time. Any variance in controlling the coating specifications could cause the PVC coated pad to be too tacky or too dry. Being too tacky is the biggest issue with harming floors as it could stick to the flooring and then there is an issue with how to remove it without harming the floors.