By BiSM1LLah-empiritrage. Area Rugs and Pads. At Wednesday, January 09th 2019, 08:06:43 AM.
For choosing the correct rug pad, use the following guideline. A pad needs to provide 3 main functions. For one, it should hold the rug in place on the floor. Two, it should provide a cushioned support. Third, it should protect the floor from harm. There are many different types of pads in the marketplace today. But finding one that can provide all 3 of the main functions we describe can be a challenge. Most rug pads satisfy the function of keeping the rug in place and not slipping. There are thin and thick open mesh types of pads that are made in China and coated with PVC (polyvinyl chloride) that do a great job of keeping rugs from moving on the floor. This same type of product can be found domestically where it is coated with a natural rubber vs PVC. This product does an effective job of keeping the rug from moving as well. Other products that provide good non-slip properties include the felt rug pads that are coated with a natural rubber. So for satisfying this non-slip function in a rug pad, there are many options to choose from depending on your budget.
When a rug is walked on, there is pressure to push through the rug and hit the floor. A quality rug pad will act as a barrier between the carpet and the floor to prevent any scratching from the back of the rug to the floor. Therefore, the carpet pad should be solid as opposed to one with holes in it. The more solid and dense the pad, the better the protection to the hardwood floor.
If you're using an area rug in a room, don't cover your floor completely. Your original floors will make a nice border to your rug. Even when you want to use a large rug, subtract at least 9-12 inches from your baseboards so that some of your flooring will show through. Finally, always use a non-ski rug pad underneath area rugs to prevent movement of the rug. The rug pad should be about 2 inches smaller than the rug so that it doesn't show through.