By BiSM1LLah-empiritrage. Area Rugs and Pads. At Tuesday, October 16th 2018, 22:29:57 PM.
Although the rug is what you see on the surface, there is much more that goes into the actual installation process. As you can imagine, a rug is not simply laid on top of the concrete or wood that is already in place. While this could be done, it is not something that you want to do if you want the job completed the right way. When it comes down to it, the rug pad that is used is just as important as what you see on the surface. If the correct rug pad is used, you will recognize this in a number of different ways. Of course, if the rug pad is left out, or a low quality option is used, you are going to notice this as well; just not in the same way.
If you're using an area rug in a room, don't cover your floor completely. Your original floors will make a nice border to your rug. Even when you want to use a large rug, subtract at least 9-12 inches from your baseboards so that some of your flooring will show through. Finally, always use a non-ski rug pad underneath area rugs to prevent movement of the rug. The rug pad should be about 2 inches smaller than the rug so that it doesn't show through.
I have been restoring and caring for antique rugs for years and have always used one of two pads. The first is a recycled jute pad that is as dense as can be for its kind. This is a 40 ounce weight, which is on the higher quality level of jute pads. This weight means there is a dense compression of fiber per square yard and this is important for protection and resistance. This pad can be used under all antique rugs that do not tend to slide around, mainly room size ones.