By BiSM1LLah-empiritrage. Area Rugs and Pads. At Tuesday, November 13th 2018, 03:51:21 AM.
There are three reasons that using a quality rug pad is important. First off, this goes a long way in making sure that your rug is durable and lasts for years on end. If your rug is simply laid on top of wood or concrete, it is going to wear quickly. And while you may not notice this early on, as time goes by, you will surely be able to tell that your rug is beginning to wear out. To avoid this, make sure that the proper rug pad is used. And if you are not the one doing the installation, you should make sure that you still know what is going on. After all, once your rug is in place there is no possible way to determine with 100 percent accuracy as to if the right pad was used. In fact, the only way that you could do this would be by lifting the entire rug; a process that you probably do not want to get involved with.
If you're using an area rug in a room, don't cover your floor completely. Your original floors will make a nice border to your rug. Even when you want to use a large rug, subtract at least 9-12 inches from your baseboards so that some of your flooring will show through. Finally, always use a non-ski rug pad underneath area rugs to prevent movement of the rug. The rug pad should be about 2 inches smaller than the rug so that it doesn't show through.
I hear many people tell me that their pad stuck to their floor and it cost them a lot of money to re-finish the floor. The type of pad that does this is an open weave waffle looking pad. It may look and feel like rubber but it actually is a plastic or nylon pad that has a chemical spray applied to it. This chemical is what transfers to the floor and leaves an imprint of the rug pad right on the floor. Real rubber does not harm the floor and a felt and natural rubber carpet pad will prevent slipping and protect the floor.